Twin Falls - 67.0 F (19.4 C)
  • Friday

    High: 70º Low: 44º

  • Saturday

    High: 60º Low: 36º

  • Sunday

    High; 47º Low: 30º

KMVT HDTV (old)

Tools

By Paul Johnson

KMVT Digital 11.1 has a new look. Sharp clear High Def Television! KMVT is broadcasting in full HDTV. To accommodate the upgrade, KMVT will broadcast on 11.1 CW will broadcast on 11.2 and Ch. 43 analog, My TV is on 11.3 and Mexicanal will air on Analog Ch 58. MY TV will be broadcast on analog Channel 58. Look for digital channel upgrades in the near future for the CW and My TV stations.
For cable one subscribers, you will find our full HD KMVT signal on Digital Channel 460.

OFF AIR KMVT/CBS is available in full HD on Digital11.1, KTWT/CW is located on Digital 11.2 and analog channel 43, KTID/My TV is 11.3 and Mexicanal is on Digital 11.3

TRANSLATORS (KMVT ONLY): Hagerman area is ch. 31 Digital, Glenns Ferry is Ch. 4 and the Burley Rupert area is Ch. 59.

CABLE ONE SUBSCRIBERS: Standard Def KMVT is on Ch. 12. High Def KMVT is Ch. 460 Digital. KTWT/CW is Ch. 2, Mexicanal is on Ch. 18 and KTID/MY TV is Ch. 58.

FILER MUTUAL TELEPHONE SUBSCRIBERS: Standard Def. KMVT is Ch. 11 and KTWT/CW is Ch. 17.

PROJECT MUTUAL TELEPHONE SUBSCRIBERS: Standard Def. KMVT is Ch. 11, KTWT/CW is Ch. 17 and KTID/MY TV is Ch. 21

COX CABLE SUBSCRIBERS IN THE SUN VALLEY AREA: Standard Def. KMVT is Ch. 11. On Cox Cable you can find us on Digital 711

DISH NETWORK SUBSCRIBERS: Standard Def KMVT is Ch 8802 and the High Def channel is 5271

DIRECT TV SUBSCRIBERS: If you are having problems receiving our station programming on your Directv system; follow the instructions below to diagnose and repair the problem.

Press - Menu on your remote
- from here selections on screen
Click: Parental Faves & Setup
Click: System Setup
Click Sat & Antennae
Click: Reset Settings
Press (-) is on remote at the bottom
- get a loading screen (approx 3 minutes)
Click: Continue
Click: Initial Setup
Enter: Enter Zip Code (use remote 83301)
- get a loading screen (approx 3 minutes)
Click: Done
- get a loading screen (approx 3 minutes)
Click: Continue
Click: Done
Click: Exit on your remote.